bavaglino e altro!
CIAOOO! Today I show you photos of two jobs I've done this week in their spare time;
this is a bib that I made for my dearest friend in February that will give birth to a beautiful girl, clearly is necessary because the ladybug brings good luck !
Then .... I thought to recall all those scraps of Aida that accrue and are likely to turn yellow with time, in which case the light is not great (see photo) but the design is difficult to see! I chose the color red for all the work, the obreggiature orange and yellow in the stamp.
Forse dovrei aggiungere una cornicetta per renderlo più vivace, ma l'idea generale è quella creare un quadretto da appendere sulla scrivania in corrispondenza della cassettina o vaschettina della posta, oppure applicarlo con la colla a caldo direttamente sulla cassettina "porta posta"! L' importante è creare...poi un posto si trova a tutto!!!!!! Ciaoooooo alla prossima!
Monday, October 5, 2009
Monday, September 28, 2009
Xanax Cost Without Insurance
nuovi progetti!
Ciao a tutti!
E dopo il punto croce e i gioielli tocca al decoupage, anzi in questo caso direi bricolage....
con l'acquisto della nuova casa infatti ho trovato un paio di lampadari ai quali vorrei dare nuova vita (buttarli mi dispiaceva). Il model is the classic gold plated chandelier with 3 arms. The idea is to repaint it and give it a beautiful red color!
is the material that you need:
- EPOX 3224 GRAY PRIMER 83, which will be diluted equally with;
- 3227 CURING AGENT FOR EPOXY PRIMER 3224.
- sandpaper;
- BRUSH;
- NITRO THINNER 416 (for cleaning the brush ).... better known as the 'fog!;
- Red enamel (spray).
The steps are 3 or 4:
1. first thing to do is to thoroughly clean the surface with a degreaser and then maybe move the sandpaper to prepare it for color and maybe to remove some rust over time it is created! I for convenience I totally disassembled the chandelier to be sure to arrive at all points. For sanding I used a medium grit paper and then a p150.
2. second thing to do, after cleaning the surface of the dust created co n sandpaper, is to go with a brush 'gripping (I used the primer with its thinner) and is painted in a gray that will serve as a basis to move the colored enamel! I'm letting it dry 24 hours. After this time I will give back a quick pass with very fine sandpaper to remove any unevenness or imperfections.
3. when the base will be perfectly dried gray spend the painting itself, for this step I use the brush but not the can (I recommend it because you do not see the brush marks) in this case, let dry overnight. To be a good result I advise you to spend more coats of enamel and then depending on the color of your choice and its effect leaving, you can also decide to pass a lacquer that makes it shiny (and this would be the fourth lap ) or if the paint was already leave it shiny.
to make it more fun to add some outstanding ... but what we will see him at another time!
soon put the photos of the work as I have already said and I hope you can appreciate, partly because non c'è maggior soddisfazione di ricevere i complimenti dopo averlo terminato!
ciao a prestooooooooooo!
Ciao a tutti!
E dopo il punto croce e i gioielli tocca al decoupage, anzi in questo caso direi bricolage....
con l'acquisto della nuova casa infatti ho trovato un paio di lampadari ai quali vorrei dare nuova vita (buttarli mi dispiaceva). Il model is the classic gold plated chandelier with 3 arms. The idea is to repaint it and give it a beautiful red color!
is the material that you need:
- EPOX 3224 GRAY PRIMER 83, which will be diluted equally with;
- 3227 CURING AGENT FOR EPOXY PRIMER 3224.
- sandpaper;
- BRUSH;
- NITRO THINNER 416 (for cleaning the brush ).... better known as the 'fog!;
- Red enamel (spray).
The steps are 3 or 4:
1. first thing to do is to thoroughly clean the surface with a degreaser and then maybe move the sandpaper to prepare it for color and maybe to remove some rust over time it is created! I for convenience I totally disassembled the chandelier to be sure to arrive at all points. For sanding I used a medium grit paper and then a p150.
2. second thing to do, after cleaning the surface of the dust created co n sandpaper, is to go with a brush 'gripping (I used the primer with its thinner) and is painted in a gray that will serve as a basis to move the colored enamel! I'm letting it dry 24 hours. After this time I will give back a quick pass with very fine sandpaper to remove any unevenness or imperfections.
3. when the base will be perfectly dried gray spend the painting itself, for this step I use the brush but not the can (I recommend it because you do not see the brush marks) in this case, let dry overnight. To be a good result I advise you to spend more coats of enamel and then depending on the color of your choice and its effect leaving, you can also decide to pass a lacquer that makes it shiny (and this would be the fourth lap ) or if the paint was already leave it shiny.
to make it more fun to add some outstanding ... but what we will see him at another time!
soon put the photos of the work as I have already said and I hope you can appreciate, partly because non c'è maggior soddisfazione di ricevere i complimenti dopo averlo terminato!
ciao a prestooooooooooo!
Subscribe to:
Posts (Atom)